Order online or call 800-431-2712
Adjustable Post Base, 4" x 4"
Primesource Building # ABE44
$6.99
Post base for mounting with a bolt embedded in concrete. For using concrete nails in existing floor. For nailing onto a wood floor or deck. Minimize or Learn More more... |
Base Post, 4" x 4"
Primesource Building # APS4
$4.59
Aluminum base post standoff. |
4" x 4" Plastic Grey Post Cap
USP Connectors # PCP44
$1.99
Seamless, keeps water off post tops to protect wood from moisture damage. Corrosion-proof and paintable. Requires one 8d or 10d nail for installation. Minimize or Learn More more... |
4" x 4" Post Anchor Triple Zinc
USP Connectors # D44-TZ
$3.49
Connects posts or anchors 4 x 4 to wood surfaces using nails. May be used only for intermediate posts between fully anchored corner/end posts in rail system. Not Recommended for fence posts or other non-top-supported applications. Not designed to resistoverturning (moment) loads. Requires eight 16d fasteners for post and four 16d fasteners for base. Meets ICBO 2039 and L.A. City RR23888 codes. For additional information including allowable loads, Please See USP Lumber Connectors charts in the Orgill paper catalog D10 Reference Pages. Minimize or Learn More more... |
4" x 4-6 Split Post Cap Triple Zinc
USP Connectors # PB44-6TZ
$2.29
For light-duty post-to-beam connections. Quick and easy installation on decks, carports and other projects. Use two caps for each installation project to act as a unit. Designed to work with single, solid sawn beams, but can be used with build-up beams made of 2x lumber and shims fastened Meets ICBO, SBCCI, BOCA - NER 505; ICBO 2039, DSA PA-076; L.A. City RR23888 and L.A. City RR25303 codes. For additional information including allowable loads loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog D10 Reference Pages. Minimize or Learn More more... |
6" x 6" Al Elevated Post Base
USP Connectors # CPB66
$5.99
Provides a raised base that elevates wood posts above concrete surfaces to avoid moisture from ground contact. Single-piece design made from composite material, will not corrode. Open center enables installation of metal rod from concrete into post. Requires four #10 wood screws or four 8d nails. ACQ approved. Minimize or Learn More more... |
6" x 6" Post Anchor Triple Zinc
USP Connectors # PA66E-TZ
$15.49
Used to secure wood posts to concrete footings, and to provide moisture damage protection. 2-sided, high uplift design includes base, washer and stand-off; anchor bolts and nails not furnished. Not recommended for fence posts or other non-top-supported applications. Not designed to resist overturning (moment) loads. Meets SBCCI, BOCA - NER 530 & NER 608, ICBO 5700; ICBO 5379, SBCCI 2038A, BOCA 2112; L.A. City RR25337 & RR25357, and DSA PA-076 codes. Minimize or Learn More more... |
Composite Elevated Post Base, 4" x 4"
USP Connectors # CPB44
$3.49
Provides a raised base that elevates wood posts above concrete surfaces to avoid moisture from ground contact. Single-piece design made from composite material, will not corrode. Open center enables installation of metal rod from concrete into post. Requires four #10 wood screws or four 8d nails. ACQ approved. Minimize or Learn More more... |
Deck Post Tie, 2" x 4"
USP Connectors # SDPT5-TZ
$2.29
Connects stair posts to deck rim joist or stair stringers. Requires 10d x 1-1/2" nails and 3/8" bolts for installation. Minimize or Learn More more... |
Deck Post Tie, 4" x 4"
USP Connectors # SDPT-TZ
$2.29
Connects stair posts to deck rim joist or stair stringers. Requires 10d x 1-1/2" nails and 3/8" bolts for installation. Minimize or Learn More more... |
Elevated Post Base Anchor, 4" x 4"
USP Connectors # EPB4408
$8.99
Allows installer to pre-align posts and to preset post height above concrete floors or footings. Eliminates post-to-concrete contact for reduced moisture damage. Nails fasten to posts for carports, decks or porches. EPB is welded and primed. EBG is galvanized for added corrosion resistance. Not recommended for fence posts or other non-top-supported applications. Not designed to resist overturning (moment) loads. Requires (8) 16d nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, L.A. City RR 25303 and DSA PA-076 codes. For additional information including allowable loads, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Minimize or Learn More more... |
Elevated Steel Post Base, 4" x 4"
USP Connectors # EBG44-TZ
$11.49
Allows installer to pre-align posts and to preset post height above concrete floors or footings. Eliminates post-to-concrete contact for reduced moisture damage. Nails fasten to posts for carports, decks or porches. EPB is welded and primed. EBG is galvanized for added corrosion resistance. Not recommended for fence posts or other non-top-supported applications. Not designed to resist overturning (moment) loads. Requires (8) 16d nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, L.A. City RR 25303 and DSA PA-076 codes. For additional information including allowable loads, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Minimize or Learn More more... |
Fence Bracket, Triple Zinc
USP Connectors # FB240-TZ
$0.89
Provides stronger fence connections and simplifies fence assembly. Can be installed before posts are set to help ensure uniform spacing and alignment. Requires two 6d fasteners for rails and two 8d fasteners for posts. Minimize or Learn More more... |
Fence Rail Bracket, 2" x 4"
USP Connectors # FRB24-TZ
$3.29
Secures continuous 2x4 rails to wood post. Prepunched holes allow installers to splice. 2x4 rail ends within the bracket. Requires (6) 10d x 1-1/2 fasteners for installation. Minimize or Learn More more... |
L-Post Strap, 1 1/2" x 6" x 6"
USP Connectors # L6TZ
$4.29
G60 galvinizing finish. Medium-duty straps connects beams to posts. Requires either 1/2" bolts or 16d nails for installation. Minimize or Learn More more... |
Post Anchor, 24"
USP Connectors # SFP24
$18.49
Install wooden posts permanently or temporarily without digging for medium-duty applications such as mailboxes, signing, fencing, wooden gym sets, detached wooden patios, etc. Removable Forcefit clamps, 2-piece construction, increases unit strength and eliminate welds which are potential weak spots. Reverse spike blades offer lateral soil resistance, increased stability, and allows driving without rotating for easy post alignment. Welded steel construction with high tech baked-on finish, rust resistant and 100% environmentally safe. Installation wood block included with each unit. Application information and installation instructions labeled on each. Matte black finish. Minimize or Learn More more... |
Post Anchor, 4" x 4"
USP Connectors # PA44-TZDP
$9.99
Used to secure wood posts to concrete footings and to provide moisture damage protection. 2-sided with high uplift and bearing capacity. Features a 1" stand-off plate to evaluate wood posts above concrete surfaces. Drain slots allow the anchors to shed water. Triple zinc finish for ACQ pressure treated lumber. Not recommended for fence posts or other non-top-supported applications. Not designed to resist overturning (moment) loads. Requires 16d nails for installation. Meets SBCCI, BOCA - NER 530, NER 608, ICBO 5700, ICBO 5379, FLA821, FLA822, SBCCI 2038A, L.A. City RR 25337, RR 25357 and DSA PA-076 codes. Minimize or Learn More more... |
Post Anchor, 4" x 4" Gold Coated
USP Connectors # PA44E-GC
$9.99
Used to secure wood posts to concrete footings and to provide moisture damage protection. 2-sided with high uplift and bearing capacity. Features a 1" stand-off plate to evaluate wood posts above concrete surfaces. Drain slots allow the anchors to shed water. "-TZ" following item number indicates Triple Zinc finish. "-GC" following item number indicates Gold Coat finish. Not recommended for fence posts or other non-top-supported applications. Not designed to resist overturning (moment) loads. Requires 16d nails for installation. Meets SBCCI, BOCA - NER 530, NER 608, ICBO 5700, ICBO 5379, FLA821, FLA822, SBCCI 2038A, L.A. City RR 25337, RR 25357 and DSA PA-076 codes. Minimize or Learn More more... |
Post Anchor, 6" x 6"
USP Connectors # PA66-TZDP
$25.99
Used to secure wood posts to concrete footings and to provide moisture damage protection. 2-sided with high uplift and bearing capacity. Features a 1" stand-off plate to evaluate wood posts above concrete surfaces. Drain slots allow the anchors to shed water. Triple zinc finish for ACQ pressure treated lumber. Not recommended for fence posts or other non-top-supported applications. Not designed to resist overturning (moment) loads. Requires 16d nails for installation. Meets SBCCI, BOCA - NER 530, NER 608, ICBO 5700, ICBO 5379, FLA821, FLA822, SBCCI 2038A, L.A. City RR 25337, RR 25357 and DSA PA-076 codes. Minimize or Learn More more... |
Post Anchor, 6" x 6" Gold Coated
USP Connectors # PA66E-GC
$19.99
Used to secure wood posts to concrete footings and to provide moisture damage protection. 2-sided with high uplift and bearing capacity. Features a 1" stand-off plate to evaluate wood posts above concrete surfaces. Drain slots allow the anchors to shed water. "-TZ" following item number indicates Triple Zinc finish. "-GC" following item number indicates Gold Coat finish. Not recommended for fence posts or other non-top-supported applications. Not designed to resist overturning (moment) loads. Requires 16d nails for installation. Meets SBCCI, BOCA - NER 530, NER 608, ICBO 5700, ICBO 5379, FLA821, FLA822, SBCCI 2038A, L.A. City RR 25337, RR 25357 and DSA PA-076 codes. Minimize or Learn More more... |
Post Beam Cap, 6" x 6"
USP Connectors # C66-TZ
$12.49
For light-duty post-to-beam connections. Quick and easy installation on decks, carports and other projects. One piece, designed to work with single, solid sawn beams, but can be used with build-up beams made of 2x lumber and shims fastened together to act as a unit. Requires 16d nails for installation. Meets SBCCI, BOCA - NER 505; ICBO 5736, ICBO 2039, L.A. City RR 23888 and L.A. City RR25303 codes - C-44, C46, C66. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Minimize or Learn More more... |
